Shopping cart
You have no items in your shopping cart.
Recently Viewed

Opening Bud Candle Mould

£16.96 incl tax
Availability: In stock
SKU: MLD009505
A two-piece polycarbonate mould to produce a highly decorative, oval shaped candle. The two pieces clip together for pouring, and then separate for easy release. Four little legs support the mould securely whilst the wax hardens. an absolute delight!

A two-piece polycarbonate mould to produce a highly decorative, oval shaped candle. The two pieces clip together for pouring, and then separate for easy release. Four little legs support the mould securely whilst the wax hardens. an absolute delight!

. Two piece polycarbonate candle mould
. Heat resistant up to 120 degrees C
. 4 supporting legs provide a sturdy base
. Use with paraffin or paraffin/stearin blend wax
. Candle mould stands approx 14cm tall, 11.5cm across and 5cm at the deepest point.
. Wick supporting pin, clips and seal included
. Try LX14 wick for paraffin wax with colour

Mould uses approx 420g wax

NB: The solvent in some candle fragrances can damage the inside surface of the mould. We don't recommend using fragrance in these moulds.

Customers who bought this item also bought
£10.10 incl tax
Add to cart
Straight-sided, square, polycarbonate candle mould for producing tall pillar candles. One piece construction for easy use, simply wick-up and pour!
£12.10 incl tax
Add to cart
A robust, one piece polycarbonate candle mould for producing a pyramid shaped candle with a sharp triangle in relief reaching the the tip. An interesting 'V'' tip adds extra interest. Very 'Art Deco'. The one piece construction means there's no assembly, just wick-up and pour!
£13.25 incl tax
Add to cart
A robust, one piece polycarbonate candle mould for producing a pyramid candle with decorative 'diamond shaped' blocks up to the tip. The one piece construction means there's no assembly, just wick-up and pour!
£1.25 incl tax
Add to cart
Metal sustainers for larger wicks. Ideal for container candles or tea light candles. Pre-wax your wick, insert end into the sustainer, crimp in place with pliers, trim to desired length.
£1.15 incl tax
Add to cart
PE22 is a polymer hardener used to raise the melt-point of wax. It is often added to wax to create hurricane candle shells, not only to give them a tough finish, but to make sure the shell doesn't melt when a tea light is burned inside it. It can also be used as a final over-dip for surface decorations to preserve the shell and stop the decorations from falling into the melt pool.
£5.65 incl tax
Add to cart
Clear gel wax for making creative container candles. Remains completely clear when set, wonderful for underwater scene candles, cocktail glass candles or candles with embeds

Articles Library

Cleaning And Caring For Your Moulds

Your candle will only ever be as good as the mould you use, so make sure they are kept sparkling clean and stored safely so they don't get any dents. The inside of moulds needs to be a high-gloss finish to give a good surface to the finished... more...